30MPa IG541 Inergen Fire Suppression System
Description
Another sort of clean agent fire suppression system that is
intended to put out flames quickly and effectively without harming
delicate equipment or leaving behind residue is the IG541 automatic
fire extinguishing system. The method produces a non-conductive,
non-conductive, and environmentally benign fire-extinguishing agent
using a combination of three naturally occurring gases: nitrogen,
argon, and carbon dioxide.
The IG541 system is frequently employed to safeguard control rooms,
server rooms, data centers, and communication hubs. The apparatus
quickly delivers the extinguishing chemical into the enclosed space
when heat or smoke are detected. The mechanism is activated by a
fire detection system.
By lowering the enclosed space's oxygen content to a point below
which combustion cannot occur, the IG541 system puts out fires. The
system is made to put out fires quickly and effectively while
causing as little damage as possible to the structure or the
equipment it is protecting.
The IG541 system's architecture is straightforward and dependable,
making installation and maintenance easy. It works well for many
different purposes. The system is quite flexible and may be set up
to satisfy different fire prevention needs.
The IG541 system has the advantage of being an environmentally safe
option for fire suppression because it has a low potential for
ozone depletion and global warming. Additionally, the system is
safe to use in occupied spaces because the extinguishing chemical
is non-toxic and doesn't produce any hazardous byproducts.
Overall, the IG541 automatic fire extinguishing system minimizes
damage and downtime while providing timely and effective protection
for irreplaceable facilities and equipment.
Parameters
| No. | Specification | Technical Parameter |
| 1 | Working Pressure | 20MPa | 30MPa |
| 2 | Device Model | QMH20/80 | QMH30/80 |
| 3 | Capacity | 80Ltr | 80Ltr |
| 4 | Filling Capacity of Gas | 22.37kg | 33.56kg |
| 5 | Filling Rate | 0.29kg/L | 0.42kg/L |
| 6 | Outside Diameter of Cylinder | Φ286mm | Φ267mm |
| 7 | Height of Cylinder | 1910mm | 1770mm |
| 8 | Max Working Pressure | 23.2MPa | 36.6MPa |
| 9 | Min Working Pressure | 18MPa | 27MPa |
| 10 | Spraying Time | ≤120s |
| 11 | Power | DC24V/1.6A |
| 12 | Nitrogen Pressure of Driving Device | 6.0±1.0Mpa(20℃) |
| 13 | Condition of Reserving Room for Container | temperature: 0~50℃ |
Application
Leaching tank, drying equipment, paint spraying booth, electrical
instrument room, control center, library, archives, treasure trove
of cultural artifacts, etc. are just a few examples of the rooms
that are available.
Packages
We always pack it with polyfoam first and then put it into a wooden
case. Sometimes, in order to meet with customers or the safety
requirement, we will make a pallet for the goods.
Advantages
One benefit of the agent, according to its description, is that it
may be applied to all classes of class fires, with the exception of
metal flames. Additionally, it is a clean agent. There are no
aftereffects of the fire's suppression in terms of pollution.
Another is the IG541 extinguishing system's proficiency in handling
important items or machinery. There won't be any harm done to your
products as a result. It is a low cost fire suppression system that
works well.
You can adequately secure your possessions by doing this. It is
equipped with an extinguishing device that can put out a fire
quickly, ideally in less than 10 seconds. It implies that all
agents will be rapidly discharged in this way. The result will be
widespread flooding. Also included is a time delay mechanism. It
takes around two minutes. It suggests that there will be ample time
to safely evacuate everyone in the case of a fire.
It can enable the secure management of multiple zones by a single
system. As a result, large and numerous zones will experience huge
cost savings.
Mimic Diagram
Multiple cylinders for one zone
Multiple cylinders for multiple zones
Company Introduction
Guangzhou Xingjin Fire Equipment Co., Ltd., surrounded by
convenient transportation and beautiful environment, is located in
Guangzhou, which plays an important role in communication between
China and the world. We are a manufacturer, and we devote ourselves
to the study and development of HFC-227ea (FM200) productions with
our professional and mature team including the program design team,
the skillful installation team, the quality detecting team and the
after-sell service team. Nowadays, our popular fm200 products are
widely used, such as the pipe network FM200 fire suppression
system, the cabinet type FM200 fire suppression system, the
automatic FM200 fire extinguisher
(ceiling mounted style), the fire detecting tube suppression system
and automatic fire suppression tube. As a result of high-quality
products and services as well as the good reputation, our company
is well-received by the customers in China.
